| C L O S E |X| |
ZYIA LZM-T SERIES MINIATURE C/W VALVE
|
|
|
ZYIA LZM-Z SERIES MINIATURE FLOW METER
|
|
|
ZYIA LZB-DK SERIES GLASS TYPE FLOW METER
|
|
|
LAKE MONITORS PNEUMATIC COMPRESSED AIR FLOW METER
|
|
|
|
|x| |
ZYIA MINIATURE FLOW METER WITH ADJUSTABLE VALVE |
| Brand |
| Model |
| Connection Size |
| Port Type |
| Display Unit |
| Float Material |
| Fitting Material |
| Body Material |
| Valve Type |
| Application |
|
| ZYIA |
| LZM-4T|LZM-6T|LZM-8T|LZM-15ZAT|LZM-15ZT|LZM-25ZT|LZM-15T|LZM-20T|LZM-25T |
| 6mm or 1/4" | 1/2" | 3/4" | 1" |
| Direct Tube or BSP Thread |
| LPM or NM3/HR |
| Stainless Steel |
| Brass Chromeplate or ABS |
| Acrylic |
| Stainless Steel Adjustable Needle Valve |
| Clean Air | Nitrogen Gas | Compressed Air |
|
|
|
|x| |
ZYIA PANEL TYPE ROTAMETER |
| Brand |
| Model |
| Connection Size |
| Port Type |
| Display Unit |
| Float Material |
| Fitting Material |
| Body Material |
| O-ring Material |
| Application |
|
| ZYIA |
| LZM-15 | LZM-2O | LZM-25 | LZM-40 |LZM-15Z | LZM-25Z | LZM-15J | LZM-20J | LZM-25J |
| 1/2" | 3/4" | 1" | 1.5" |
| BSPT or NPT |
| NM3/HR |
| Stainless Steel |
| ABS |
| Acrylic |
| Silicon Rubber |
| Clean Air | Nitrogen Gas | Compressed Air |
|
|
|
|x| |
ZYIA GLASS TYPE ROTAMETER WITH ADJUSTABLE VALVE |
| Brand |
| Model |
| Connection Size |
| Port Type |
| Display Unit |
| Material |
| Accuracy |
| Max. Pressure |
| Max. Temp |
| Application |
|
| ZYIA |
| LZB-3 | LZB-4 | LZB-6 | LZB-10 | LZB-3G | LZB-4G | LZB-6G | LZB-10G | LZB-DK100 | LZB-DK200 | LZB-DK300 |
| 3 | 4 | 6 | 10 mm or 1/8" | 1/4" | 1/2" | 3/4" |
| Direct Tube or Female NPT |
| mL/min |LPH | LPM |
| [Float] Stainless Steel or PTFE , [Fitting] Stainless Steel or ABS , [Tube] Borosilicate Glass , [Base] PTFE or Stainless Steel |
| 3 - 4 % |
| 1.0Mpa max. |
| [PVC] 60°C max. | [PTFE] 80°C max. | [SS304] 120°C max. |
| Corrosive Gases | Nitrogen Gas | Clean Air |
|
|
|
|x| |
COMPRESSED AIR / PNEUMATIC FLOW RATE INDICATOR |
| Brand |
| Model |
| Line Size |
| Connection Type |
| Display Unit |
| Material |
| Accuracy |
| Max. Pressure |
| Max. Temp |
| Application |
|
| LAKE MONITOR, USA |
| PNEUMATIC FLOW RATE MONITORS, G-Series |
| 1/4" | 3/8" | 1/2" | 1" | 1-1/4" | 1-1/2" | 2" |
| Female NPT | BSPT | SAE |
| SCFM (Std) or NM3/M(upon request) |
| [Casing & Shaft] Aluminum-Brass-Stainless Steel , [Tube] Polycarbonate or Pyrex , [Seal] Buna-N or Viton |
| 2.5% of Full Scale | 1% Repeatability |
| 1000psi(g) max. |
| 116°C max. |
| Compressed Air | Pneumatic Air | Nitrogen Gas | Clean Air |
|
|
|
|
CDI 5200 / 5400 (INDOOR) COMPRESSED AIR FLOW METER
|
|
|
CDI 6200 / 6400 (OUTDOOR) COMPRESSED AIR FLOW METER
|
|
|
FCI ST-50 (INSERTION TYPE) COMPRESSED AIR FLOW METER
|
|
|
FCI ST-75 (INLINE TYPE) COMPRESSED AIR FLOW METER
|
|
|
|
|x| |
CDI-ME COMPRESSED AIR CLAMP-ON MASS FLOW METER |
| Brand |
| Model |
| Line Size |
| Mounting |
| Power Supply |
| Display |
| Accuracy |
| Output |
| Material |
| Option |
|
| CDI Meters |
| CDI-5200 Series | CDI-5400 Series (For Indoor Application) |
| 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 4" | 5" | 6" | 8" |
| Clamp-On through 3/16" Insertion Hole (Provided with Drill Guide) |
| 20 - 28 VDC, 250mA |
| [Flow Rate] SCFH|SCFM|NM3M|NM3H & [Totaliser] SCF|NM3 |
| 5% plus 1% of Full Scale |
| 4 - 20 mA | Pulse | Modbus(optional) |
| [Enclosure] ABS(UL94) , [Ring] Aluminium , [Sensor Probe] SS304 + Gold Plated + Thermal Epoxy. |
| Drill Guide | Summing Remote Display | Averaging Remote Display | RS485 Serial Comm. | Portable Data Logger |
|
|
|
|x| |
CDI-ME COMPRESSED AIR CLAMP-ON MASS FLOW METER |
| Brand |
| Model |
| Line Size |
| Mounting |
| Power Supply |
| Display |
| Accuracy |
| Output |
| Material |
| Option |
|
| CDI Meters |
| CDI-6200 Series | CDI-6400 Series (For Outdoor Application) |
| 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 4" | 5" | 6" | 8" |
| Clamp-On through 3/16" Insertion Hole (Provided with Drill Guide) |
| 20 - 28 VDC, 250mA |
| [Flow Rate] SCFH|SCFM|NM3M|NM3H & [Totaliser] SCF|NM3 |
| 5% plus 1% of Full Scale |
| 4 - 20 mA | Pulse | Modbus(optional) |
| [Enclosure] ABS(UL94) , [Ring] Aluminium , [Sensor Probe] SS304 + Gold Plated + Thermal Epoxy. |
| Drill Guide | Summing Remote Display | Averaging Remote Display | RS485 Serial Comm. | Portable Data Logger |
|
|
|
|x| |
FCI COMPRESSED AIR MASS FLOW METER |
| Brand |
| Model |
| Line Size |
| Accuracy |
| Process Temp. |
| Process Pressure |
| Power Supply |
| Display |
| Output |
| Material |
| Enclosure Type |
| Approval |
|
| FCI, USA |
| ST50 SERIES |
| 2" - 24" with Adjustable Compression Fitting at 1/2" or 3/4" NPT Insertion Hole |
| 0.5% of Full Scale , 1 - 2% of Reading |
| [Standard] 4 to 38°C , [Optional] -18 to 121°C |
| 34bar(g) max. |
| 85 - 265 VAC or 18 - 36 VDC |
| 4-Digit Flow Rate (Unit Selection : SFPS | SMPS | SCFM | SCFH | GPM | LPM | NCMH | NCMM | KGH | LBSH) |
| Dual 4 - 20 mA (Flow Rate & Temperature) | Pulse(Optional) |
| All welded SS316 Probe Element with Hastelloy-C Thermowells, SS316 Compression Fitting with Teflon or SS Ferrule |
| NEMA 4X(IP67), Aluminium with Epoxy Coated, Dual Conduit Ports with either 1/2"NPT or M20x1.5 entries. |
| FM/CSA ; ATEX/IECEx: II 3 G EEx nA II T6; II 3 D T65°C(DC input power only)CPA, CE Mark, PED |
|
|
|
|x| |
FCI THERMAL MASS FLOW METER |
| Brand |
| Model |
| Media |
| Line Size |
| Accuracy |
| Temp & Pressure |
| Power Supply |
| Display |
| Output |
| Material |
| Enclosure Type |
| Approval |
|
| FCI, USA |
| ST75 Series | ST75V Series |
| Air | Compressed Air | N2 | CO2 | Argon | Helium | Natural Gas | Methane | Ammonia | Any Hydrocarbon Gas |
| 1/4" to 2" NPT | Tube | Flange |
| 0.5% of Full Scale , 1 - 2% of Reading |
| Temp: -18 to 121°C , Pressure: [Tee] 16.5bar(g) max. | [Tube] 41bar(g) max. |
| 85 - 265 VAC or 18 - 36 VDC |
| 2 Line x 16 characters LCD [Flow Rate & Totaliser] |
| Dual 4 - 20 mA (Flow Rate & Temperature) | Pulse |
| All welded SS316 Probe Element with Hastelloy-C Thermowells, SS316 Compression Fitting with Teflon or SS Ferrule |
| NEMA 4X(IP67), Aluminium with Epoxy Coated, Dual Conduit Ports with either 1/2"NPT or M20x1.5 entries. |
| FM/CSA ; ATEX/IECEx: II 3 G EEx nA II T6; II 3 D T65°C(DC input power only)CPA, CE Mark, PED |
|
|
|
|
VORTEX FLOW METER (WAFER) STEAM FLOW METER
|
|
|
VORTEX FLOW METER (FLANGE) STEAM FLOW METER
|
|
|
|
|
|x| |
WAFER TYPE MULTIVARIABLE VORTEX STEAM FLOW METER |
| Brand |
| Model |
| Connection Size |
| Accuracy |
| Process Temp. |
| Process Pressure |
| Power Supply |
| Display |
| Output |
| Body Material |
| Enclosure Type |
| Approval |
|
| VORTEK, USA |
| M22 Series [ V | VT | VTP | VT-EM | VTP-EM ] |
| 1/2" - 8" WAFER ANSI 600# |
| [Volumetric Flow] 1% of Reading , [Mass Flow] 1% of Reading , [Temp] 1°C , [Pressure] 0.3% of Full Scale |
| [Standard] -200 to 260°C , [Optional] -200 to 400°C |
| 1500 psi(g) max. |
| 100 - 240 VAC or 12 - 36 VDC |
| 2 Line x 16 Character: Volumetric Flow | Mass Flow | Temperature | Pressure | Energy(optional) |
| 4-20mA | Pulse | HART | Alarm | Modbus(optional) |
| Carbon Steel | SS316 | Hastelloy |
| NEMA 4X(IP67), Aluminium with Epoxy Coated, Dual Conduit Ports with either 1/2"NPT or M20x1.5 entries. |
| FM/FMC:CLASS 1,DIV 1,Group B,C,D | ATEX/IECEx: II 2 G Exd IIB + H2 T6 & II 2 D Ex tD A21 IP66 T85°C | CE Mark |
|
|
|
|x| |
FLANGE MOUNT VORTEX STEAM FLOW METER |
| Brand |
| Model |
| Connection Size |
| Accuracy |
| Process Temp. |
| Process Pressure |
| Power Supply |
| Display |
| Output |
| Body Material |
| Enclosure Type |
| Approval |
|
| VORTEK, USA |
| M22 Series [ V | VT | VTP | VT-EM | VTP-EM ] |
| 1/2" - 8" FLANGE [ ANSI 150# | ANSI 300# | ANSI 600# | PN16 | PN40 | PN64 ] |
| [Volumetric Flow] 1% of Reading , [Mass Flow] 1% of Reading , [Temp] 1°C , [Pressure] 0.3% of Full Scale |
| [Standard] -200 to 260°C , [Optional] -200 to 400°C |
| 1500 psi(g) max. |
| 100 - 240 VAC or 12 - 36 VDC |
| 2 Line x 16 Character: Volumetric Flow | Mass Flow | Temperature | Pressure | Energy(optional) |
| 4-20mA | Pulse | HART | Alarm | Modbus(optional) |
| Carbon Steel | SS316 | Hastelloy |
| NEMA 4X(IP67), Aluminium with Epoxy Coated, Dual Conduit Ports with either 1/2"NPT or M20x1.5 entries. |
| FM/FMC:CLASS 1,DIV 1,Group B,C,D | ATEX/IECEx: II 2 G Exd IIB + H2 T6 & II 2 D Ex tD A21 IP66 T85°C | CE Mark |
|
|
|
|
- CLOSE SPECS|X| - |
| C L O S E |X| |
KENT KSM SERIES (ABS) MECHANICAL WATER METER
|
|
|
KENT PSM SERIES (BRASS) VOLUMETRIC WATER METER
|
|
|
KENT HELIX 4000 SERIES WOLTMAN COLD WATER METER
|
|
|
MULTI JET WATER METER MULTI JET WATER METER
|
|
|
|
|x| |
PLASTIC TYPE MECHANICAL VOLUMETRIC WATER METER |
| Brand |
| Model |
| Size |
| Connection |
| Display Unit | Accuracy |
| Max Press |
| Max Temp |
| Body Material |
| Option |
| Application |
|
| ELSTER KENT |
| KSM Series |
| 1/2" | 3/4" | 1" |
| Thread Connection |
| Cubic Metric, M3 or Litre, L |
| 3 - 5% of measured value |
| 10 bar max. |
| 50°C max |
| Plastic |
| Reed Switch Pulse |
| Clean Water |
|
|
|
|x| |
BRASS TYPE MECHANICAL VOLUMETRIC WATER METER |
| Brand |
| Model |
| Size |
| Connection |
| Display Unit | Accuracy |
| Max Press |
| Max Temp |
| Body Material |
| Option |
| Application |
|
| ELSTER KENT |
| PSM Series |
| 1/2" | 3/4" | 1" | 1-1/2" |
| Thread Connection |
| Cubic Metric, M3 or Litre, L |
| 3 - 5% of measured value |
| 16 bar max. |
| 50°C max |
| Brass |
| Reed Switch Pulse |
| Clean Water |
|
|
|
|x| |
WOLTMAN COLD WATER METER |
| Brand |
| Model |
| Size |
| Connection |
| Display Unit | Accuracy |
| Max Press |
| Max Temp |
| Body Material |
| Option |
| Application |
|
| ELSTER KENT |
| HELIX 4000 Series |
| 1-1/2" to 12" (DN40 - DN300) |
| Flange |
| Cubic Metric, M3 |
| 3 - 5% of measured value |
| 16 bar max. |
| 70°C max |
| Steel with epoxy coated |
| Reed Switch Pulse |
| Clean Water |
|
|
|
|x| |
MULTI-JET WATER METER |
| Brand |
| Model |
| Size |
| Connection |
| Display Unit | Accuracy |
| Max Press |
| Max Temp |
| Material |
| Option |
| Application |
|
| DWYER |
| WM Series |
| 1/2" | 3/4" | 1" | 1-1/2" | 2" or (DN15 - DN50) |
| NPT |
| 9,999,999 Cubic Metric, M3 |
| 3 - 5% of measured value |
| 10 bar max. |
| 40°C max |
| [Body] Brass, nylon, acetal [Couplings] Brass [Measuring chamber] Fluorocarbon, polyethylene, ABS plastic |
| Reed Switch Pulse |
| Clean Water |
|
|
|
|
ZYIA LZM-Z SERIES PANEL TYPE ROTAMETER
|
|
|
ZYIA LZM-G SERIES WATER PVC ROTAMETER
|
|
|
ZYIA LZS SERIES DOUBLE UNION PVC ROTAMETER
|
|
|
ZYIA LZB SERIES GLASS TYPE ROTAMETER
|
|
|
|
|x| |
ZYIA PANEL TYPE ROTAMETER |
| Brand |
| Model |
| Connection Size |
| Port Type |
| Display Unit |
| Float Material |
| Fitting Material |
| Body Material |
| O-ring Material |
| Application |
|
| ZYIA |
| LZM-15 | LZM-2O | LZM-25 | LZM-40 |LZM-15Z | LZM-25Z | LZM-15J | LZM-20J | LZM-25J |
| 1/2" | 3/4" | 1" | 1.5" |
| BSPT or NPT |
| NM3/HR |
| Stainless Steel |
| ABS |
| Acrylic |
| Silicon Rubber |
| Clean Air | Nitrogen Gas | Compressed Air |
|
|
|
|x| |
ZYIA PVC ROTAMETER |
| Brand |
| Model |
| Connection Size |
| Port Type |
| Display Unit |
| Float Material |
| Fitting Material |
| Body Material |
| Leader Material |
| Application |
|
| ZYIA |
| LZM-15G | LZM-2OG | LZM-25G | LZM-40G |LZM-50G | LZM-75GF |
| 1/2" | 3/4" | 1" | 1-1/2" | 2" | 3" |
| BSP (Female or Male) |
| LPH or M3/HR |
| Stainless Steel |
| ABS |
| Acrylic |
| Stainless Steel |
| Raw Water | Clean Water |
|
|
|
|x| |
DOUBLE UNION PVC ROTAMETER |
| Brand |
| Model |
| Type |
| Connection Size |
| Port Type |
| Display Unit |
| Float Material |
| Fitting Material |
| Body Material |
| Application |
|
| ZYIA |
| LZS-15 | LZS-25 | LZS-32 | LZS-50 |LZS-65 | LZS-100 | LZS-125 |
| Guide Rod | Non Guide Rod (for chemicals application) |
| 1/2" | 1" | 1-1/4" | 2" | 2-1/2" | 4" | 5" |
| Double Union Socket or BSP Thread |
| M3/HR |
| ABS |
| ABS |
| PVC |
| Raw Water | Clean Water |
|
|
|
|x| |
GLASS TYPE ROTAMETER |
| Brand |
| Model |
| Connection Size |
| Port Type |
| Display Unit |
| Material |
| Accuracy |
| Max. Temp |
| Max. Pressure |
| Application |
|
| ZYIA |
| LZB-GA Series | LZB-VA Series | LZB-SA Series | LZB-FA Series | |
| 1/2" | 3/4" | 1" | 1-1/2" | 2" | 3" |
| [VA Series] Screw , [VA Series] Hose , [FA Series] Movable Flange , [GA Series] SS Flange |
| LPH |
| [Float & Leader] SS304 , [Housing] Aluminum with Epoxy Coating , [Glass] High Boron Silicate , [Guide Stop] PTFE(optional) |
| 1.5% |
| -20 to 60°C | 0 - 120°C |
| 10bar(g) max. |
| Raw Water | Clean Water |
|
|
|
|
MOSEB FLOCOUNTER PADDLE WHEEL FLOW METER
|
|
|
MOSEB FLOCOUNTER (CLAMP) PADDLE WHEEL FLOW METER
|
|
|
FLS LOW FLOW METER ULTRA LOW FLOW METER
|
|
|
FLS BATCH CONTROLLER BATCHING FLOW METER
|
|
|
|
|x| |
MOSEB FLOCOUNTER PADDLE WHEEL FLOW METER |
| Model |
| Display |
| Line Size |
| Port Type |
| Display Unit |
| Accuracy |
| Material |
| Power Supply |
| Max Pressure |
| Output |
| Application |
|
| Moseb Flocounter |
| Flow Rate & Totaliser |
| 1/2" | 1" | 1-1/2" | 2" | 2-1/2" | 3" |
| [Standard] PVC White Tee Socket , [Optional] Double Union Tee Socket | Horizontal or Vertical Mount |
| [Flowrate] GPM | GPH | LPH | LPM | M3/hr [Totaliser] Gallons | Litres | Cubic Metric |
| +/-2.5% |
| [Enclosure] ABS , [Sensor & Bearing] PP , [Pin Rod] Carbide , [O-ring] Viton |
| 70 - 270 VAC or 2 x 1.5 VDC AA Size Battery |
| 5 - 6 Bar |
| None |
| Raw Water, DI Water , Clean Water , Chemicals & Waste Water |
|
|
|
|x| |
LOW COST DIGITAL PADDLE WHEEL FLOW METER |
| Model |
| Display |
| Line Size |
| Port Type |
| Display Unit |
| Accuracy |
| Material |
| Power Supply |
| Max Pressure |
| Output |
| Application |
|
| Moseb Flocounter |
| Flow Rate & Totaliser |
| 2" | 2-1/2" | 3" | 4" | 6" | 8" |
| [2" to 4"] PP Saddle with SS Clamp , [6" & 8"] PVC Weld-on Adaptor |
| [Flowrate] GPM | GPH | LPH | LPM | M3/hr [Totaliser] Gallons | Litres | Cubic Metric |
| +/-2.5% |
| [Enclosure] ABS , [Sensor & Bearing] PP , [Pin Rod] Carbide , [O-ring] Viton |
| 70 - 270 VAC or 2 x 1.5 VDC AA Size Battery |
| 5 - 6 Bar |
| None |
| Raw Water, DI Water , Clean Water , Chemicals & Waste Water |
|
|
|
|x| |
FLS LOW FLOW PADDLE WHEEL FLOW METER |
| Brand |
| Model |
| Display |
| Connection Size |
| Display Unit |
| Accuracy |
| Material |
| Power Supply |
| Max Pressure |
| Output |
| Application |
|
| FLS, ITALY |
| FLOWX3 Series (F9.00.P1 + ULF03.R) |
| Flow Rate & Totaliser |
| 1/4" GAS Male Thread (1.5 to 100LPH or 6 to 250LPH) |
| [Flowrate] GPM | GPH | LPH | LPM | M3/hr [Totaliser] Gallons | Litres | Cubic Metric |
| 0.1% f Full Scale |
| [Enclosure] ABS , [Sensor & Bearing] POM or ECTFE [O-ring] FRM |
| 24VDC |
| 5 - 6 Bar |
| 4 - 20mA | Pulse | Relay(optional) |
| Raw Water, DI Water , Clean Water , Chemicals & Waste Water |
|
|
|
|x| |
FLS BATCH CONTROLLER FLOW METER |
| Brand |
| Model |
| Display |
| Connection Size |
| Display Unit |
| Accuracy |
| Material |
| Power Supply |
| Max Pressure |
| Input |
| Output |
| Application |
|
| FLS, ITALY |
| FLOWX3 Batch controller Series (F9.50 + F3.00) |
| Batch Capacity | Flow Rate | Totaliser |
| 1/2" | 3/4" | 1" | 1-1/2" | 2" | 2-1/2" | 3" | 4" | 5" | 6" | 8" |
| [Flowrate] GPM | GPH | LPH | LPM | M3/hr [Totaliser] Gallons | Litres | Cubic Metric |
| 0.1% f Full Scale |
| [Enclosure] ABS , [Sensor] CPVC | PVDF | SS , [Bearing & Pin] Ceramic , [O-ring] EPDM or FDM |
| 24VDC |
| 5 - 6 Bar |
| Start Batch & End Batch |
| 4 - 20mA | 2x Relays |
| Raw Water, DI Water , Clean Water , Chemicals & Waste Water |
|
|
|
|
EUROMAG MUT1000EL+MC608 ELECTROMAGNETIC FLOW METER
|
|
|
EUROMAG MUT2200EL+MC608 ELECTROMAGNETIC FLOW METER
|
|
|
EUROMAG MUT2660|MUT2770 ELECTROMAGNETIC FLOW METER
|
|
|
EUROMAG MUT2400 FOOD GRADE FLOW METER
|
|
|
|
|x| |
WAFER TYPE ELECTROMAGNETIC FLOW METER |
| Brand |
| Model |
| Line Size |
| Connection |
| Accuracy |
| Electrode |
| Proces Temp. |
| Max Pressure |
| Protection |
| Liner |
| Power Supply |
| Output |
| Application |
| Approval |
|
| EUROMAG (Italy) |
| [Converter] MC608A , [Sensor] MUT1000ME |
| 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 4" | 6" | 8" | 10" | 12" |
| Wafer according to PN16 oR PN40 |
| 0.3 - 0.5% of measured value |
| [Standard] Hastelloy C , [Optional] Hastelly B | Titanium | Tantalum | Platinum |
| [Compact] -40 to 80°C , [Remote Type] -40 to 130°C , [Optional] -40 to 180°C |
| [1" to 4"] 40bar(g) max. , [4" to 12"] 16bar(g) max. |
| [Converter] IP65 , [Sensor] IP67/IP68 |
| EBONITE or PTFE |
| 90 - 264 VAC or 12 - 24VDC or Battery |
| 4-20mA | Pulse | RS485 Modbus RTU | GSM/GPRS(optional) |
| Raw Water, Waste Water, Cement Water, Slurry & All Conductive Liquids |
| SPAN Approval , ATEX: II 2GD EEx mb IIC T4 U |
|
|
|
|x| |
EUROMAG ELECTROMAGNETIC FLOW METER |
| Brand |
| Model |
| Line Size |
| Connection |
| Accuracy |
| Electrode |
| Proces Temp. |
| Max Pressure |
| Protection |
| Liner |
| Power Supply |
| Output |
| Application |
| Approval |
|
| EUROMAG (Italy) |
| [Converter] MC608A , [Sensor] MUT2200ME |
| DN25 to DN2000 |
| Flange according to ANSI 150# / ANSI 300# / DIN2501 |
| 0.3 - 0.5% of measured value |
| [Standard] Hastelloy C , [Optional] Hastelly B | Titanium | Tantalum | Platinum |
| [Compact] -40 to 80°C , [Remote Type] -40 to 130°C , [Optional] -40 to 180°C |
| [1" to 4"] 40bar(g) max. , [4" to 12"] 16bar(g) max. |
| [Converter] IP65 , [Sensor] IP67/IP68 |
| EBONITE or PTFE |
| 90 - 264 VAC or 12 - 24VDC or Battery |
| 4-20mA | Pulse | RS485 Modbus RTU | GSM/GPRS(optional) |
| Raw Water, Waste Water, Cement Water, Slurry & All Conductive Liquids |
| SPAN APPROVAL , ATEX: II 2GD EEx mb IIC T4 U |
|
|
|
|x| |
INSERTION TYPE ELECTROMAGNETIC FLOW METER |
| Brand |
| Model |
| Line Size |
| Connection |
| Accuracy |
| Electrode |
| Proces Temp. |
| Max Pressure |
| Protection |
| Insertion Length |
| Power Supply |
| Output |
| Application |
| Approval |
|
| EUROMAG (Italy) |
| [Converter] MC608A , [Sensor] MUT2660ME / MUT2770ME |
| [MUT2660] DN80 - DN500 , [MUT2770] DN80 - DN2000 |
| [MUT2660] 1-1/4" NPT Brass Compression Fitting , [MUT2770] SS304 FLANGE UNI 2278 DN 40 PN16 |
| 3% of measured value |
| [Body] SS304 , [Sensor Head] PTFE , [Electrode] SS316L |
| [Compact] -40 to 80°C , [Remote Type] -40 to 130°C , [Optional] -40 to 180°C |
| [MUT2660] 10bar(g) max. , [MUT2770] 16bar(g) max. |
| [Converter] IP65 , [Sensor] IP67/IP68 |
| 1/8 of Internal Diameter. |
| 90 - 264 VAC or 12 - 24VDC or Battery |
| 4-20mA | Pulse | RS485 Modbus RTU | GSM/GPRS(optional) |
| Raw Water, Waste Water, Cement Water, Slurry & All Conductive Liquids |
| SPAN APPROVAL , ATEX: II 2GD EEx mb IIC T4 U |
|
|
|
|x| |
FOOD GRADE ELECTROMAGNETIC FLOW METER |
| Brand |
| Model |
| Line Size |
| Connection |
| Accuracy |
| Electrode |
| Proces Temp. |
| Max Pressure |
| Protection |
| Liner |
| Power Supply |
| Output |
| Application |
| Approval |
|
| EUROMAG (Italy) |
| [Converter] MC608A , [Sensor] MUT2400ME |
| 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 4" |
| TRI-CLAMP according to DIN11851 |
| 0.3 - 0.5% of measured value |
| [Standard] SS316l , [Optional] Hastelloy C |Hastelly B | Titanium | Tantalum | Platinum |
| [Compact] -40 to 80°C , [Remote Type] -40 to 140°C , [Optional] -40 to 180°C |
| [Standard] 16bar(g) max. , [Optional] 64bar(g) max. |
| [Converter] IP65 , [Sensor] IP67/IP68 |
| PTFE |
| 90 - 264 VAC or 12 - 24VDC or Battery |
| 4-20mA | Pulse | RS485 Modbus RTU | GSM/GPRS(optional) |
| Raw Water, Waste Water, Cement Water, Slurry & All Conductive Liquids |
| EHEDG & 3A Approval , ATEX: II 2GD EEx mb IIC T4 U |
|
|
|
|
EUROMAG EUROSONIC 2000HH ULTRASONIC FLOW METER
|
|
|
EUROMAG EUROSONIC 2000W ULTRASONIC FLOW METER
|
|
|
AXIOMA QALCOSONIC FLOW2 ULTRASONIC FLOW SENSOR
|
|
|
AXIOMA QALCOSONIC FLOW4 ULTRASONIC WATER METER
|
|
|
|
|x| |
HANDHELD TYPE ULTRASONIC CLAMP-ON FLOW METER |
| Brand |
| Model |
| Type |
| Size |
| Accuracy |
| Power Supply |
| Max Temp |
| Output |
| Display |
| Application |
|
| EUROMAG, Italy |
| ES2000HH |
| Handheld |
| [S1 Sensor] 1/2" to 4" , [M1 Sensor] 2" to 28" , [L1 Sensor] 12" - 240" |
| 1 - 3% of measured value |
| 3AAA NiH Rechargeable Batteries (10Hrs) |
| [Transducer] -40 to 110 Deg C , [Converter] -10 to 55 deg C |
| Data Logger(2000 Lines of Data) |
| 2 lines of 20 characters ; Back lit LCD Display |
| Water | Alcohol | Sea Water | Kerosene | Gasoline | Fuel Oil | Crude Oil | Diesel Oil | Castor Oil | Propane |
|
|
|
|x| |
WALL MOUNT TYPE ULTRASONIC CLAMP-ON FLOW METER |
| Brand |
| Model |
| Type |
| Size |
| Accuracy |
| Power Supply |
| Max Temp |
| Output |
| Display |
| Application |
|
| EUROMAG, Italy |
| ES2000HH |
| Wall Mount |
| [S1 Sensor] 1/2" to 4" , [M1 Sensor] 2" to 28" , [L1 Sensor] 12" - 240" |
| 1 - 3% of measured value |
| 90 - 264 VAC or 12 - 24VDC |
| [Transducer] -40 to 110 Deg C , [Converter] -10 to 55 deg C |
| 4-20mA | Pulse | RS485 Modbus RTU | Relay |
| 2 lines of 20 characters ; Back lit LCD Display |
| Water | Alcohol | Sea Water | Kerosene | Gasoline | Fuel Oil | Crude Oil | Diesel Oil | Castor Oil | Propane |
|
|
|
|x| |
ULTRASONIC HEAT & COOLING WATER SENSOR |
| Brand |
| Model |
| Measuring Principle |
| Connection Size |
| Accuracy Class |
| Proces Temp. |
| Max Pressure |
| Power Supply Options |
| IP Protection |
| Output |
| Agency Approval |
|
| AXIOMA (Lithuania) |
| QALCOSONIC FLOW 1 | QALCOSONIC FLOW 2 |
| Ultrasonic Technology |
| DN15..DN100 |
| Class 2 (Class 1 upon request) according to LST EN 1434:2000 |
| +5..130°C |
| PN16/25 bar |
| 24Vdc / 230Vac / Battery (>12years) |
| IP65/67 |
| Normalized Pulse |
| MID EN 14154 |
|
|
|
|x| |
ULTRASONIC HEAT & COOLING WATER METER |
| Brand |
| Model |
| Measuring Principle |
| Connection Size |
| Accuracy Class |
| Process Temp & Max. Pressure. |
| Optional Temp measurement |
| Power Supply Option |
| IP Protection |
| Comm. Output |
| Agency Approval |
| Data Logging |
| Flow Sensor Cable |
|
| AXIOMA (Lithuania) |
| QALCOSONIC FLOW 3 | QALCOSONIC FLOW 4 |
| Ultrasonic Technology |
| DN15..DN100 |
| Class 2 (Class 1 upon request) according to LST EN 1434:2000 |
| +5..90°C ; 1.6MPa/2.5MPa |
| Pt500, 0° C … 180° C |
| 24Vdc / 230Vac / Battery (>12years) |
| IP65/67 |
| Modbus RS485, Radio 868 MHz, M-Bus, LON & MiniBus |
| OIML R49 & MID EN 14154 |
| Every hour, day and month of the measured parameters |
| 1.2m (2.5m or 5m upon request |
|
|
|
|
AXIOMA QALCOSONIC HEAT1 COMPACT ENERGY METER
|
|
|
AXIOMA QALCOMET HEAT1 ENERGY CALCULATOR
|
|
|
AXIOMA QALCOMAG FLOW1 ELECTROMAGNETIC FLOW SENSOR
|
|
|
AXIOMA QALCOMATIC FLOW HOT WATER METER
|
|
|
|
|x| |
ULTRASONIC ENERGY WATER METER |
| Brand |
| Model |
| Measuring Principle |
| Display Unit |
| Connection Size |
| No. of Inputs [For HEAT 2] |
| Accuracy Class |
| Process Temp & Max. Pressure. |
| Optional Temp measurement |
| Power Supply Option |
| IP Protection |
| Comm. Output |
| Agency Approval |
| Data Logging |
| Flow Sensor Cable |
|
| AXIOMA (Lithuania) |
| QALCOSONIC HEAT 1 | QALCOSONIC HEAT 2 |
| Ultrasonic Technology |
| MWh, Gcal, GJ, kWh, °C, m3, m3/hr, kPa |
| [HEAT 1]: DN15..DN50 ; [HEAT 2]: DN25..DN100 |
| Flow - 2 inputs, Temp - 2 inputs, Pressure - 2 inputs |
| Class 2 (Class 1 upon request) according to LST EN 1434:2000 |
| +5..130°C ; 1.6MPa/2.5MPa |
| Pt500, 0° C … 180° C |
| 24Vdc / 230Vac / Battery (>12years) |
| IP65/67 |
| Modbus RS485, Radio 868 MHz, M-Bus, LON & MiniBus |
| MID EN 14154 |
| Every hour, day and month of the measured parameters |
| 1.2m (2.5m or 5m upon request |
|
|
|
|x| |
MULTI-PURPOSE ENERGY CALCULATOR |
| Brand |
| Model |
| Measuring Principle |
| Display Unit |
| No. of Inputs |
| Accuracy Class |
| Process Temp & Max. Pressure. |
| Optional Temp measurement |
| Power Supply Option |
| IP Protection |
| Comm. Output |
| Relay Output |
| Agency Approval |
| Data Logging |
|
| AXIOMA (Lithuania) |
| QALCOMET HEAT 1 |
| Ultrasonic Technology |
| MWh, Gcal, GJ, kWh, °C, m3, m3/hr, kPa |
| Flow - 5 inputs, Temp - 5 inputs, Pressure - 2 inputs |
| Class 2 (Class 1 upon request) according to LST EN 1434:2000 |
| +5..130°C ; 1.6MPa/2.5MPa |
| Pt500, 0° C … 180° C |
| 24Vdc / 230Vac / Battery (>12years) |
| IP65/67 |
| 4-20mA, Pulse, Modbus RS485, RS232, M-Bus, Optical |
| High or Low Alarm |
| MID EN 14154 |
| Daily Records up to 33mths, Hourly up to 3.5mths |
|
|
|
|x| |
ELECTROMAGNETIC SENSOR |
| Brand |
| Model |
| Measuring Principle |
| Connection Size |
| Accuracy Class |
| Proces Temp. |
| Max Pressure |
| Power Supply Options |
| IP Protection |
| Output |
| Agency Approval |
| Application |
|
| AXIOMA (Lithuania) |
| QALCOMAG FLOW 1 |
| Electromagnetic Technology |
| DN20..DN200 |
| Class 2 (Class 1 upon request) according to LST EN 1434:2000 |
| +5..150°C |
| PN16 bar |
| 24Vdc / 230Vac |
| IP65/67 |
| Normalized Pulse & 4-20mA |
| MID EN 14154 |
| Wasterwater of Any conductive liquids above 5uS/cm |
|
|
|
|x| |
MECHANICAL HOT & COLD WATER METER |
| Brand |
| Model |
| Measuring Principle |
| Connection Size |
| Accuracy Class |
| Proces Temp. |
| Max Pressure |
| Power Supply Options |
| IP Protection |
| Output |
| Agency Approval |
| Logging |
|
| AXIOMA (Lithuania) |
| QALCOMATIC FLOW H | QALCOMATIC FLOW C |
| Turbine |
| DN15..DN25 ; 1.6..4 m3/hr |
| Class 2 according to LST EN 1434:2000 |
| [FLOW C]: +0.1..30°C ; [FLOW H]: +30..90°C ; |
| 1.0MPa |
| Battery (>12years) |
| IP65 |
| Radio 868 MHz, Optical |
| MID EN 14154 |
| Monthly & yearly Commulative Log |
|
|
|
|
- CLOSE SPECS|X| - |
| C L O S E |X| |
ZYIA LZM-ZT SERIES NITROGEN GAS FLOW METER
|
|
|
ZYIA LZB SERIES GAS TYPE GLASS ROTAMETER
|
|
|
CDI 5200 / 5400 SERIES NITROGEN GAS FLOW METER
|
|
|
CDI 6200 / 6400 SERIES NITROGEN GAS FLOW METER
|
|
|
|
|x| |
ZYIA PANEL TYPE GAS FLOW METER WITH ADJUSTABLE VALVE |
| Brand |
| Model |
| Connection Size |
| Port Type |
| Display Unit |
| Float Material |
| Fitting Material |
| Body Material |
| Valve Type |
| Application |
|
| ZYIA |
| LZM-4T|LZM-6T|LZM-8T|LZM-15ZAT|LZM-15ZT|LZM-25ZT|LZM-15T|LZM-20T|LZM-25T |
| 6mm or 1/4" | 1/2" | 3/4" | 1" |
| Direct Tube or BSP Thread |
| LPM or NM3/HR |
| Stainless Steel |
| Brass Chromeplate or ABS |
| Acrylic |
| Stainless Steel Adjustable Needle Valve |
| Clean Air | Nitrogen Gas | Compressed Air |
|
|
|
|x| |
ZYIA GLASS TYPE GAS ROTAMETER WITH ADJUSTABLE VALVE |
| Brand |
| Model |
| Connection Size |
| Port Type |
| Display Unit |
| Material |
| Accuracy |
| Max. Pressure |
| Max. Temp |
| Application |
|
| ZYIA |
| LZB-3 | LZB-4 | LZB-6 | LZB-10 | LZB-3G | LZB-4G | LZB-6G | LZB-10G | LZB-DK100 | LZB-DK200 | LZB-DK300 |
| 3 | 4 | 6 | 10 mm or 1/8" | 1/4" | 1/2" | 3/4" |
| Direct Tube or Female NPT |
| mL/min |LPH | LPM |
| [Float] Stainless Steel or PTFE , [Fitting] Stainless Steel or ABS , [Tube] Borosilicate Glass , [Base] PTFE or Stainless Steel |
| 3 - 4 % |
| 1.0Mpa max. |
| [PVC] 60°C max. | [PTFE] 80°C max. | [SS304] 120°C max. |
| Corrosive Gases | Nitrogen Gas | Clean Air |
|
|
|
|x| |
CDI-ME NITROGEN GAS CLAMP-ON FLOW METER |
| Brand |
| Model |
| Line Size |
| Mounting |
| Power Supply |
| Display |
| Accuracy |
| Output |
| Material |
| Option |
|
| CDI Meters |
| CDI-5200 Series | CDI-5400 Series (For Indoor Application) |
| 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 4" | 5" | 6" | 8" |
| Clamp-On through 3/16" Insertion Hole (Provided with Drill Guide) |
| 20 - 28 VDC, 250mA |
| [Flow Rate] SCFH|SCFM|NM3M|NM3H & [Totaliser] SCF|NM3 |
| 5% plus 1% of Full Scale |
| 4 - 20 mA | Pulse | Modbus(optional) |
| [Enclosure] ABS(UL94) , [Ring] Aluminium , [Sensor Probe] SS304 + Gold Plated + Thermal Epoxy. |
| Drill Guide | Summing Remote Display | Averaging Remote Display | RS485 Serial Comm. | Portable Data Logger |
|
|
|
|x| |
CDI-ME NITROGEN GAS FLOW METER |
| Brand |
| Model |
| Line Size |
| Mounting |
| Power Supply |
| Display |
| Accuracy |
| Output |
| Material |
| Option |
|
| CDI Meters |
| CDI-6200 Series | CDI-6400 Series (For Outdoor Application) |
| 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 4" | 5" | 6" | 8" |
| Clamp-On through 3/16" Insertion Hole (Provided with Drill Guide) |
| 20 - 28 VDC, 250mA |
| [Flow Rate] SCFH|SCFM|NM3M|NM3H & [Totaliser] SCF|NM3 |
| 5% plus 1% of Full Scale |
| 4 - 20 mA | Pulse | Modbus(optional) |
| [Enclosure] ABS(UL94) , [Ring] Aluminium , [Sensor Probe] SS304 + Gold Plated + Thermal Epoxy. |
| Drill Guide | Summing Remote Display | Averaging Remote Display | RS485 Serial Comm. | Portable Data Logger |
|
|
|
|
FCI ST-51 MASS FLOWMETER BIOGAS FLOW METER
|
|
|
FCI ST-75 MASS FLOWMETER CO2 GAS FLOW METER
|
|
|
FCI ST-98 MASS FLOWMETER NATURAL GAS FLOW METER
|
|
|
FCI ST-100 MASS FLOWMETER HYDROCARBON GAS FLOWMETER
|
|
|
|
|x| |
FCI BIOGAS THERMAL MASS FLOW METER |
| Brand |
| Model |
| Media |
| Line Size |
| Accuracy |
| Process Temp. |
| Process Pressure |
| Power Supply |
| Display |
| Output |
| Material |
| Enclosure Type |
| Approval |
|
| FCI, USA |
| ST51 SERIES |
| Biogas | Digester Gas | Methane | Natural Gas | Air | Compressed Air | Nitrogen |
| 2" - 24" with Adjustable Compression Fitting at 1/2" or 3/4" NPT Insertion Hole |
| 0.5% of Full Scale , 1 - 2% of Reading |
| [Standard] 4 to 38°C , [Optional] -18 to 121°C |
| 34bar(g) max. |
| 85 - 265 VAC or 18 - 36 VDC |
| 2 Line x 16 characters LCD [Flow Rate & Totaliser] |
| Dual 4 - 20 mA (Flow Rate & Temperature) | Pulse |
| All welded SS316 Probe Element with Hastelloy-C Thermowells, SS316 Compression Fitting with Teflon or SS Ferrule |
| NEMA 4X(IP67), Aluminium with Epoxy Coated, Dual Conduit Ports with either 1/2"NPT or M20x1.5 entries. |
| FM/CSA ; ATEX/IECEx: Zone 1, II 2 G Ex d IIC T6...T3, II 2 D Ex tD A21 IP67 T90°C...T300°C |
|
|
|
|x| |
FCI THERMAL MASS FLOW METER |
| Brand |
| Model |
| Media |
| Line Size |
| Accuracy |
| Temp & Pressure |
| Power Supply |
| Display |
| Output |
| Material |
| Enclosure Type |
| Approval |
|
| FCI, USA |
| ST75 Series | ST75V Series |
| Air | Compressed Air | N2 | CO2 | Argon | Helium | Natural Gas | Methane | Ammonia | Any Hydrocarbon Gas |
| 1/4" to 2" NPT | Tube | Flange |
| 0.5% of Full Scale , 1 - 2% of Reading |
| Temp: -18 to 121°C , Pressure: [Tee] 16.5bar(g) max. | [Tube] 41bar(g) max. |
| 85 - 265 VAC or 18 - 36 VDC |
| 2 Line x 16 characters LCD [Flow Rate & Totaliser] |
| Dual 4 - 20 mA (Flow Rate & Temperature) | Pulse |
| All welded SS316 Probe Element with Hastelloy-C Thermowells, SS316 Compression Fitting with Teflon or SS Ferrule |
| NEMA 4X(IP67), Aluminium with Epoxy Coated, Dual Conduit Ports with either 1/2"NPT or M20x1.5 entries. |
| FM/CSA ; ATEX/IECEx: II 3 G EEx nA II T6; II 3 D T65°C(DC input power only)CPA, CE Mark, PED |
|
|
|
|x| |
FCI GAS MASS FLOW METER |
| Brand |
| Model |
| Media |
| Line Size |
| Accuracy |
| Process Temp. |
| Process Pressure |
| Power Supply |
| Display |
| Output |
| Material |
| Enclosure Type |
| Approval |
|
| FCI, USA |
| ST98 Series | ST98L Series |
| All Hydrocarbon Gases, Clean Gases, Wet Gases, Corrosive Gases, Very Dirty Gases [PLEASE CONTACT US FOR DETAILS] |
| [ST98] 2-1/2" to 42" with 1/2" or 3/4" NPT Insertion Hole | [ST98L] 1", 1-1/2", 2" Female NPT or Flange SCH40 Tee |
| 0.5% of Full Scale , 1% of Reading |
| [Standard] -40 to 125°C or -40 to 177°C , [Optional] -40 to 260°C or -40 to 454°C |
| [Teflon Ferrule] 10bar(g) max. | [Metal Ferrule] 17bar(g) max. |
| 85 - 265 VAC or 18 - 36 VDC |
| 2 Line x 16 characters LCD [Flow Rate & Totaliser] |
| Dual 4 - 20 mA (Flow Rate & Temperature) | Pulse | HART | Profibus |
| All welded SS316 Probe Element with Hastelloy-C Thermowells, SS316 Compression Fitting with Teflon or SS Ferrule |
| NEMA 4X(IP67), Aluminium with Epoxy Coated, Dual Conduit Ports with either 1/2"NPT or M20x1.5 entries. |
| FM/CSA ; ATEX/IECEx: Zone 1, II 2 G Ex d IIC T6...T3, II 2 D Ex tD A21 IP67 T90°C...T300°C |
|
|
|
|x| |
FCI MULTIVARIABLE THERMAL MASS FLOW METER |
| Brand |
| Model |
| Media |
| Line Size |
| Accuracy |
| Process Temp. |
| Process Pressure |
| Power Supply |
| Display |
| Output |
| Material |
| Enclosure Type |
| Approval |
|
| FCI, USA |
| ST100 Series | ST100L Series |
| All Hydrocarbon Gases, Clean Gases, Wet Gases, Corrosive Gases, Very Dirty Gases [PLEASE CONTACT US FOR DETAILS] |
| [ST100] 1" to 60" with 3/4" or 1" NPT Insertion Hole | [ST100L] 1", 1-1/2", 2" Female NPT or Flange SCH40 Tee |
| 0.5% of Full Scale , 1% of Reading |
| [Standard] -40 to 125°C or -40 to 177°C , [Optional] -40 to 260°C or -40 to 454°C |
| [Teflon Ferrule] 10bar(g) max. | [Metal Ferrule] 69bar(g) max. |
| 85 - 265 VAC or 18 - 36 VDC |
| Backlight Graphic Display + Data Logger + Multivariable [Flow Rate | Flow Totaliser | Temperature | Pressure] |
| Triple 4 - 20 mA | Pulse | HART | Profibus | RS485 | Foundation Fieldbus | Alarm |
| All welded SS316 Probe Element with Hastelloy-C Thermowells, SS316 Compression Fitting with Teflon or SS Ferrule |
| NEMA 4X(IP67), Aluminium with Epoxy Coated, Dual Conduit Ports with either 1/2"NPT or M20x1.5 entries. |
| FM/CSA: Class 1, Division 1, Hazardous Location Group B,C,D,E,F,G | ATEX/IECEx: Zone 1, II 2 GD Ex d IIC T4 |
|
|
|
|
COMMON CPT-01 (THREAD) MECHANICAL GAS FLOW METER
|
|
|
COMMON CPT-01 (WAFER) INDUSTRIAL GAS QUANTOMETER
|
|
|
VORTEK M22 Series (WAFER) VORTEX FLOW METER
|
|
|
VORTEK M22 Series (FLANGE) VORTEX FLOW METER
|
|
|
|
|x| |
GAS QUANTOMETER |
| Brand |
| Model |
| Media |
| Line Size |
| Accuracy |
| Process Temp. |
| Pressure Rating |
| Orientation |
| Display |
| Output |
| Material |
| Approval |
|
| COMMON, Porland |
| CPT-01 Series |
| All Hydrocarbon Gases, Argon, N2, CO2, Helium, Air, Hydrogen [PLEASE CONTACT US FOR DETAILS] |
| 1" | 1-1/4" | 1-1/2" | 2" |
| [Qt-Qmax] Below 1.5% [Qmin-Qt] Below 3.0% |
| -25 to 70°C |
| PN16 | PN20 | ANSI150 |
| Horizontal or Vertical |
| 8-Digit Mechanical Display |
| [Standard] Low Frequency Reed Contact Pulse , [Optional] Namur Pulse |
| Aluminum |
| ATEX: II 2G EEx ia IIB T4, II 2G EEx ia IIC T4. CE Mark, PED. |
|
|
|
|x| |
MECHANICAL TYPE GAS FLOW METER |
| Brand |
| Model |
| Media |
| Line Size |
| Accuracy |
| Process Temp. |
| Pressure Rating |
| Orientation |
| Display |
| Output |
| Material |
| Approval |
|
| COMMON, Porland |
| CPT-01 Series |
| All Hydrocarbon Gases, Argon, N2, CO2, Helium, Air, Hydrogen [PLEASE CONTACT US FOR DETAILS] |
| 2" - 12" |
| [Qt-Qmax] Below 1.5% [Qmin-Qt] Below 3.0% |
| -25 to 70°C |
| PN16 | PN20 | ANSI150 |
| Horizontal or Vertical |
| 8-Digit Mechanical Display |
| [Standard] Low Frequency Reed Contact Pulse , [Optional] Namur Pulse |
| Aluminum or Steel(DN200) |
| ATEX: II 2G EEx ia IIB T4, II 2G EEx ia IIC T4. CE Mark, PED. |
|
|
|
|x| |
WAFER TYPE VORTED FLOW METER |
| Brand |
| Model |
| Connection Size |
| Accuracy |
| Process Temp. |
| Process Pressure |
| Power Supply |
| Display |
| Output |
| Body Material |
| Enclosure Type |
| Approval |
|
| VORTEK, USA |
| M22 Series [ V | VT | VTP | VT-EM | VTP-EM ] |
| 1/2" - 8" WAFER ANSI 600# |
| [Volumetric Flow] 1% of Reading , [Mass Flow] 1% of Reading , [Temp] 1°C , [Pressure] 0.3% of Full Scale |
| [Standard] -200 to 260°C , [Optional] -200 to 400°C |
| 1500 psi(g) max. |
| 100 - 240 VAC or 12 - 36 VDC |
| 2 Line x 16 Character: Volumetric Flow | Mass Flow | Temperature | Pressure | Energy(optional) |
| 4-20mA | Pulse | HART | Alarm | Modbus(optional) |
| Carbon Steel | SS316 | Hastelloy |
| NEMA 4X(IP67), Aluminium with Epoxy Coated, Dual Conduit Ports with either 1/2"NPT or M20x1.5 entries. |
| FM/FMC:CLASS 1,DIV 1,Group B,C,D | ATEX/IECEx: II 2 G Exd IIB + H2 T6 & II 2 D Ex tD A21 IP66 T85°C | CE Mark |
|
|
|
|x| |
VORTEX FLOW METER FOR GAS APPLICATION |
| Brand |
| Model |
| Connection Size |
| Accuracy |
| Process Temp. |
| Process Pressure |
| Power Supply |
| Display |
| Output |
| Body Material |
| Enclosure Type |
| Approval |
|
| VORTEK, USA |
| M22 Series [ V | VT | VTP | VT-EM | VTP-EM ] |
| 1/2" - 8" FLANGE [ ANSI 150# | ANSI 300# | ANSI 600# | PN16 | PN40 | PN64 ] |
| [Volumetric Flow] 1% of Reading , [Mass Flow] 1% of Reading , [Temp] 1°C , [Pressure] 0.3% of Full Scale |
| [Standard] -200 to 260°C , [Optional] -200 to 400°C |
| 1500 psi(g) max. |
| 100 - 240 VAC or 12 - 36 VDC |
| 2 Line x 16 Character: Volumetric Flow | Mass Flow | Temperature | Pressure | Energy(optional) |
| 4-20mA | Pulse | HART | Alarm | Modbus(optional) |
| Carbon Steel | SS316 | Hastelloy |
| NEMA 4X(IP67), Aluminium with Epoxy Coated, Dual Conduit Ports with either 1/2"NPT or M20x1.5 entries. |
| FM/FMC:CLASS 1,DIV 1,Group B,C,D | ATEX/IECEx: II 2 G Exd IIB + H2 T6 & II 2 D Ex tD A21 IP66 T85°C | CE Mark |
|
|
|
|
FLEXIM FLUXUS G601 ULTRASONIC GAS FLOW METER
|
|
|
|
|
|x| |
ULTRASONIC CLAMP-ON GAS FLOW METER |
| Brand |
| Model |
| Principle |
| Line Size |
| Accuracy |
| Process Temp. |
| Data Capacity |
| Power Supply |
| Display |
| Input |
| Output |
| Language |
| Accesories |
| Approval |
|
| FLEXIM, GERMANY |
| Fluxus G601 |
| Transit Time Difference Correlation |
| 7 to 1600mm |
| 1 - 3% of Reading |
| -10 to 60°C |
| 100,000 Points |
| 7.2V/4.5 AH Li-Ion Battery | 100 - 240 VAC or 10.5 - 15 VDC |
| 2 Line x 16 Character: [Flow Rate] Volumetric Flow | Mass Flow | Flow Velocity [Totaliser] Volume & Mass |
| PT100 or PT1000 | 4 - 20mA | 0 - 1V |
| 4-20mA | Frequency | Binary | RS232 or USB |
| English, German, French, Dutch, Spanish |
| Transport Case, Battery, Power Supply Unit, I/O Adaptor, Measuring Tape, Serial Data Kit, Damping Mat, etc |
| ATEX Zone 2 (1), FM Class I Div II |
|
|
|
|
- CLOSE SPECS|X| - |
| C L O S E |X| |
PIUSI K33 / K44 MECHANICAL OIL FLOW METER
|
|
|
TECHNOTON DFM SERIES LOW FLOW FUEL METER
|
|
|
GPI G2 SERIES FUEL OIL FLOW METER
|
|
|
GPI A1 SERIES HYDRAULIC OIL FLOW METER
|
|
|
|
|x| |
MECHANICAL DIESEL OIL FLOW METER |
| Brand |
| Model |
| Display |
| Line Size |
| Range |
| Accuracy |
| Resolution |
| Fluid Pressure |
| Fluid Temp. |
| Material |
| Output |
|
| PIUSI, Italy |
| K33 | K44 (Nutating Disc Meter ) |
| [K33] 3-Digit Subtotal + 6-Digit Total [K44] 4-Digit Subtotal + 7-Digit Total |
| 1" BSP |
| 20 - 120 LPM |
| 1% of Full Scale |
| 0.1 Litre |
| 10bar(g) max. |
| -10°C to +60°C |
| [Body]: Aluminium , [Shaft] Stainless Steel , [Seals] Viton |
| Pulser Card: Open Colection, 10pulse/litre, 6-24VDC, 10mA |
|
|
|
|x| |
DIESEL FUEL OIL CONSUMPTION FLOW METER |
| Brand |
| Model |
| Display |
| Power Supply |
| Line Size |
| Range |
| Accuracy |
| Resolution |
| Fluid Pressure |
| Fluid Temp. |
| Body Material |
| Application |
|
| TECHNOTON, Belarus |
| DFM C Series (With Display) , DFM A Series (With Pulse but w/o Display) , DFM CK Series (With Display & Pulse) |
| [Standard] Flow Rate | Total Fuel Consumption , [Optional] Operation Engine Time | Fuel Temperature |
| [Without output] Built-in Battery(24mths) , [With output] 10-50VDC |
| [DFM 50/90/100] 6mm , [DFM 220/250] 8mm , [DFM 400] 10mm |
| 1-50LPH | 3 - 90LPH | 2-100LPH | 8 - 220LPH | 5-250LPH | 30-400LPH |
| 1-2% of Full Scale |
| [Flow Rate] 0.1 LPH , [Totaliser] 0.1 Litre |
| 25bar(g) max. |
| [Display] -20°C to +60°C , [Without Display] -40°C to +80°C |
| Aluminum |
| Diesel Fuel Measurement for Engines, Burner, Genset, Trucks, Tractors, Vehicles, etc |
|
|
|
|x| |
GPI DIGITAL TURBINE FUEL OIL FLOW METER |
| Brand |
| Model |
| Display |
| Power Supply |
| Line Size |
| Range |
| Accuracy |
| Resolution |
| Fluid Pressure |
| Fluid Temp. |
| Material |
| Approval |
|
| GPI, USA |
| GPI G2 Series |
| Flow Rate & Total Fuel Consumption |
| Lithium Batteries (9,000hrs) |
| 1/2" | 3/4" | 1" | 1-1/2" | 2" NPT or ISO |
| [1/2"]3.8-37.9LPM , [3/4"]7.6-75.7LPM , [1"]18.9-190LPM , [1-1/2"]38-380LPM , [2"]76-760LPM |
| 1.5% of Reading |
| [Flow Rate] 0.1 LPH , [Totaliser] 0.1 Litre |
| 21bar(g) max. |
| [Display] -10°C to +60°C , [Without Display] -40°C to +121°C |
| [Housing] SS316 , [Bearing] Ceramic , [Shaft] Tungsten Carbide , [Rotor] PVDF , [Rings] SS316 |
| FM | UL | CE | Ex | Nema 4 | ATEX | IP44 |
|
|
|
|x| |
GPI DIGITAL TURBINE DIESEL OIL FLOW METER |
| Brand |
| Model |
| Display |
| Power Supply |
| Line Size |
| Range |
| Accuracy |
| Resolution |
| Fluid Pressure |
| Fluid Temp. |
| Material |
| Approval |
|
| GPI, USA |
| GPI A1 Series |
| Flow Rate & Total Fuel Consumption |
| Lithium Batteries (9,000hrs) |
| 1" | 2" NPT or ISO |
| [1"] 1 to 10LPM or 10 to 190LPM , [2"] 100 to 1000LPM |
| 1.5% of Reading |
| [Flow Rate] 0.1 LPH , [Totaliser] 0.1 Litre |
| 21bar(g) max. |
| [Display] -10°C to +60°C , [Without Display] -40°C to +121°C |
| [Housing] Aluminum , [Bearing] Ceramic , [Shaft] Tungsten Carbide , [Rotor] Nylon , [Rings] SS316 |
| FM | UL | CE | Ex | Nema 4 | ATEX | IP44 |
|
|
|
|
CHINA OGM SERIES OVAL GEAR FLOW METER
|
|
|
CHINA OGM-A SERIES OVAL GEAR FLOW METER
|
|
|
MACNAUGHT M/F SERIES DIESEL OIL FLOW METER
|
|
|
MACNAUGHT S SERIES SOLVENT FLOW METER
|
|
|
|
|x| |
OVAL GEAR OIL FLOW METER |
| Model |
| Display |
| Line Size |
| Port Type |
| Accuracy |
| Resolution |
| Fluid Pressure |
| Fluid Temp. |
| Body Material |
|
| OGM or LC Series |
| 4-Digit Ressetable Subtotal + 5-Digit Cummulative Total |
| 1/2" | 3/4" | 1" | 1-1/2" | 2" | 3" | 4" |
| Flange |
| 0.5% of Reading |
| 1 Litre |
| 16bar(g) max. |
| -10°C to +80°C |
| Cast Iron |
|
|
|
|x| | CLAMP-ON COMPRESSED AIR/ NITROGEN GAS FLOW METER |
| Model |
| Display |
| Line Size |
| Port Type |
| Flow Range |
| Accuracy |
| Resolution |
| Fluid Pressure |
| Fluid Temp. |
| Max Viscosity |
| Body Material |
| Optional |
|
| OGM Series |
| 4-Digit Ressetable Subtotal + 6-Digit Cummulative Total |
| 1" | 1-1/2" | 2" |
| BSP Thread |
| [1"]20-200LPM , [1-1/2"]25-250LPM , [2"]30-300LPM |
| 0.5% of Reading |
| 1 Litre |
| 16bar(g) max. |
| -10°C to +80°C |
| 1000 Centipoise (cPs) |
| Aluminum |
| Pulse |
|
|
|
|x| |
MACNAUGHT DIESEL OIL FLOW METER |
| Brand |
| Model |
| Display |
| Line Size |
| Port Type |
| Accuracy |
| Viscosity |
| Fluid Pressure |
| Fluid Temp. |
| Protection |
| Material |
| Output |
| Approval |
|
| Manaught, Australia |
| F Series(Fuel & Oil) | M Series(Industrial) |
| [Mechanical Register] Resettable Subtotal + Cummulative Total , [Electronic Digital] Flow Rate + Totaliser |
| 1/4" | 1/2" | 3/4" | 1" | 1-1/2" | 2" | 3" | 4" |
| [Below 2"] Thread (BSP / NPT) , [Above 2"] Flange (ANSI 150/DIN PN16/JIS) |
| Mechanical: 0.5% of Reading ; Digital: 1% of Reading |
| 1000 Centipoise (cPs) |
| 5 - 55 Bar |
| [Standard] -40°C to +80°C , [Optional] -10°C to +120°C |
| IP67 |
| [Body] Aluminium | SS316 , [Rotor] PTFE | PPS | SS316 , [Shaft] SS316 , [O-ring] NBR(Nitrile) |
| 4-20mA | Pulse | Batching Relay | Transistor | Alarm |
| CE | ATEX | IECEx |
|
|
|
|x| |
SOLVENT / CHEMICAL FLOW METER |
| Brand |
| Model |
| Display |
| Line Size |
| Port Type |
| Accuracy |
| Viscosity |
| Fluid Pressure |
| Fluid Temp. |
| Protection |
| Material |
| Output |
| Approval |
|
| Manaught, Australia |
| S Series(Solvent) | CR Series(Industrial) |
| [Mechanical Register] Resettable Subtotal + Cummulative Total , [Electronic Digital] Flow Rate + Totaliser |
| 1/4" | 1/2" | 3/4" | 1" | 1-1/2" | 2" | 3" | 4" |
| [Below 2"] Thread (BSP / NPT) , [Above 2"] Flange (ANSI 150/DIN PN16/JIS) |
| Mechanical: 0.5% of Reading ; Digital: 1% of Reading |
| 1000 Centipoise (cPs) |
| 5 - 55 Bar |
| [Standard] -40°C to +80°C , [Optional] -10°C to +120°C |
| IP67 |
| [Body] Cast Aluminium(S) | PPS or PTFE(CR) , [Rotor] SS316{s) | PPS or PTFE(CR) , [Seal] Perfluoro Elastomer |
| 4-20mA | Pulse | Batching Relay | Transistor | Alarm |
| CE | ATEX | IECEx |
|
|
|
|
TCS (USA) 700 SERIES POSITIVE DISPLACEMENT FLOW
|
|
|
PIUSI ST SERIES FUEL TRANSFER / DISPENSER
|
|
|
PIUSI DRUM SERIES DRUM FUEL DISPENSER
|
|
|
LAKE MONITOR HYDRAULIC HYDRAULIC OIL FLOW INDICATOR
|
|
|
|
|x| |
TCS PISTON & ROTARY POSITIVE DISPLACEMENT FLOW METER |
| Brand |
| Model |
| Combination |
| Line Size |
| Port Type |
| Accuracy |
| Repeatability |
| Viscosity |
| Fluid Pressure |
| Fluid Temp. |
| Material |
| Accesories |
|
| TCS, USA |
| 700 Series |
| Meter + Register + Air Eliminator + Strainer + Ticket Printer(optinal) + Preset(optional) + Valve(optional) |
| 1-1/2" | 2" | 3" | 4" |
| [Standard] NPT , [Optional] ANSI & DIN Flange |
| 0.1% of Reading |
| 0.02% of Full Scale |
| Up to 1,500,000 SSU (325,000 Centipoise,cPs) |
| [Standard] 10.5 bar(g) max. , [Optional] 25 bar(g) max. |
| -40°C to +71°C |
| [Housing & Rotor] Anodized Aluminium , [Bearing Plate] Ni-Resist or SS316 , [Timing Gear] SS316 |
| Counter Preset | Ticket Printer | Pulse Transmitter | Electronic meter | Microswitch | Counter Extension |
|
|
|
|x| |
PIUSI FUEL TRANSFER / DISPENSER SYSTEM |
| Brand |
| Model |
| Display |
| Line Size |
| Flow Range |
| Accuracy |
| Pump Type |
| Hose Length |
| Nozzle Type |
| Material |
| Fluid Temp. |
|
| PIUSI, Italy |
| ST PANTHER56 | ST E80 | ST E120 |
| [K33] 3-Digit Subtotal + 6-Digit Total [K44] 4-Digit Subtotal + 7-Digit Total |
| 1" BSP |
| Up to 100LPM Nominal Flow |
| 1% of Full Scale |
| 1/2 | 2/3 | 1 Horse Power, AC230V, 50Hz |
| 3/4" x 4 metres Hose | 1" x 4 metres Hose |
| Manual or Auto |
| [Body]: Aluminium , [Shaft] Stainless Steel , [Seals] Viton |
| -10°C to +60°C |
|
|
|
|x| |
DRUM FUEL DISPENSER SYSTEM |
| Brand |
| Model |
| Display |
| Line Size |
| Flow Range |
| Accuracy |
| Pump Type |
| Hose Length |
| Nozzle Type |
| Material |
| Fluid Temp. |
|
| PIUSI, Italy |
| DRUM PANTHER56 |
| [K33] 3-Digit Subtotal |
| 1" BSP |
| Up to 80LPM Nominal Flow |
| 1% of Full Scale |
| 1/2 | 2/3 | 1 Horse Power, AC230V, 50Hz |
| 3/4" x 4 metres Hose | 1" x 4 metres Hose |
| Manual or Auto |
| [Body]: Aluminium , [Shaft] Stainless Steel , [Seals] Viton |
| -10°C to +60°C |
|
|
|
|x| |
HYDRAULIC OIL FLOW INDOCATOR |
| Brand |
| Model |
| Line Size |
| Connection Type |
| Display Unit |
| Material |
| Accuracy |
| Max. Pressure |
| Max. Temp |
| Application |
|
| LAKE MONITOR, USA |
| HYDRAULIC FLOW RATE MONITORS, B Series |
| 1/4" | 3/8" | 1/2" | 1" | 1-1/4" | 1-1/2" | 2" |
| Female NPT | BSPT | SAE |
| [Standard] LPM or GPM, [Optional] M3/HR |
| [Casing & Shaft] Aluminum | Brass | Stainless Steel , [Tube] Polycarbonate , [Seal] Buna-N or Viton |
| 2.5% of Full Scale | 1% Repeatability |
| 6000psi(g) max. |
| [Standard] 116°C max. , [Optional] 316°C max. |
| Compressed Air | Pneumatic Air | Nitrogen Gas | Clean Air |
|
|
|
|
VMX SIGHT GLASS SIGHT GLASS INDICATOR
|
|
|
|
|
|x| |
FLOW SIGHT GLASS INDICATOR |
| Brand |
| Line Size |
| Port Type |
| Max Press |
| Max Temp |
| Body |
| Glass | Gasket |
| Bolt |
| Application |
|
| WASINO (Japan) or Equivalent |
| 1/2" | 3/4" | 1" | 1-1/2" | 2" | 3" | 4" | 5" | 6" |
| Flange End (PN16 DIN2633 / ANSI B16.6 / JIS 10K RF) or Screw End |
| 20 Bar |
| 150 deg C |
| Stainless Steel 316 or Stainless Steel 304 |
| Borosilicate |
| Teflon / PTFE |
| Stainless Steel 304 |
| Water, Lubricant Oil or Cooling System |
|
|
|
|
- CLOSE SPECS|X| - |
|
